A power system that integrates solar power, battery energy storage and diesel generator sets is usually called a hybrid power system, and it comes in three main types: an all-in-one mobile station, a modular system built from separate containers, and a hybrid microgrid power plant. MPMC, a Shanghai-based manufacturer and the developer of China's national standards for mobile hybrid power stations, builds all three.
Type 1: All-in-One Hybrid Power Stations
MPMC's GSB Series combines a 2,375 W slide-out solar array, LFP storage from 20.4 kWh to 112.5 kWh and a Perkins, Kubota or Yanmar generator set in one mobile unit, with outputs from 10 kVA to 120 kVA. The AC-coupled design uses a hybrid inverter of 10 to 60 kVA or a PCS of 60 to 270 kVA, switches seamlessly between generator set and PCS, and is controlled by an SGC 120MKII or DEIF AGC 150. The GB Series offers the same approach without the slide-out array, with optional solar MPPT input; the GB-30, for example, combines 62.7 kWh of LFP storage, a 30 kVA hybrid inverter and a 24 kW / 30 kVA prime-rated generator set. A GSB-10 travels at 2,900 × 1,150 × 2,240 mm and expands to 3,030 × 5,500 × 3,350 mm with its array deployed, up to four GSB units fit in a 20-foot container, and MPMC recently delivered ten GSB-20-40 stations.
Type 2: Modular Hybrid Systems
Larger temporary or semi-permanent sites assemble the system from separate units: SPK mobile solar plants from 7.65 kWp to 231.84 kWp, HBD-R mobile storage from 30 kW to 610 kW or HBD-E all-in-one storage, and containerised generator sets, all coordinated by MPMC's EMS; HBD-R parallels with DSE, ComAp, DEIF, Woodward, Smartgen, CAT EMCP and Cummins PCC controllers. Each block can be sized and moved independently as the site changes.
Type 3: Hybrid Microgrid Power Plants
For long-term off-grid supply, MPMC builds hybrid microgrids. In Kenya, each of four sites combines 1 MW of PV, at least 1 MWh of DC-coupled battery storage with dual-unit redundancy, and 2 × 500 kW plus 2 × 250 kW generator sets. MPMC's SCADA and EMS, with Starlink backup, provide PQ, VF, VSG, black start, grid-forming and intelligent generation dispatch, delivering stable 24/7 power with minimal on-site staff. For larger solar-plus-storage plants, DC-coupled HBD-DC 410 and HBD-DC 5000 units extend capacity up to 5,015 kWh per unit.
Table 1. Three types of solar-storage-diesel power system
|
Type |
MPMC products |
Scale |
Best suited to |
|
All-in-one |
GSB (slide-out PV); GB with optional MPPT |
10-120 kVA (GSB); up to 500 kVA (GB) |
Site offices, camps, monitoring points, remote equipment |
|
Modular |
SPK solar + HBD-R or HBD-E + generator sets |
Tens of kW to MW |
Construction, events, mining |
|
Microgrid |
PV + HBD-A or HBD-DC + containerised generator sets |
MW scale |
Villages, islands, off-grid industry |

MPMC GB-30 hybrid power station combining 62.7 kWh of LFP storage, a 30 kVA hybrid inverter and a 24 kW / 30 kVA generator set.
How the Three Sources Work Together
In every type, MPMC's EMS uses multi-source data and weather forecasting with three goals: maximise PV generation, minimise diesel runtime and keep storage ready to respond. Solar carries the daytime load and charges the battery, the battery supplies evenings and absorbs peaks, and the generator set runs at an efficient load when required. On Australian mining sites, 245 GSB units form a 14.7 MW integrated power project, and a mine lease hybrid plant of GSB units totals 4.5 MWh.
Table 2. MPMC hybrid power references
|
Project |
Scale |
Type |
|
Mining integrated power plant, Australia |
14.7 MW |
245 GSB all-in-one stations |
|
Mine lease hybrid plant, Australia |
4.5 MWh |
GSB 10, 20 and 30 kW units |
|
Building construction, Australia |
1.08 MWh |
GSB all-in-one stations |
|
Remote-area microgrid, Kenya |
4 sites |
PV + DC-coupled BESS + generator sets |
|
Hybrid station delivery |
10 units |
GSB-20-40 all-in-one stations |

Solar array at MPMC's remote-area hybrid microgrid in Kenya.
GSB and GB systems carry a 2-year or 1,500-hour system warranty and a 3-year battery warranty, and every hybrid project includes design consultation, customisation, factory testing, logistics and commissioning support.
Choosing a Hybrid System Type With MPMC
• Define the load, its daily profile and how long the site will operate
• Decide whether the system must move between sites
• Assess the solar resource and available space
• Set the role of the generator set: primary or backup
• Contact MPMC at sales@mpmc-china.com or WhatsApp +86 150 0085 4420 for a hybrid power system proposal
https://www.mpmc-group.com/
MPMC Powertech Corp.
